Interface Range Commands I Table of Contents Chapter 1 Interface Range Commands....................................................................................................... 1 1.1 Interface Range................................................................................................................................. 1 II Chapter 1 Interface Range Commands 1.1 Interface Range Syntax interface range type slot/[, ] Parameters Name Usage Guidelines Value Range type Port type All reasonable port types, except the manager port on the main control board of the cabinet-like switch slot Slot number All legal slot numbers port1 Starting value of the port All legal port numbers on a slot numbers port2 Ending value of the port All legal port numbers on a slot which are no numbers smaller than port 1 port3 An independent port All legal port numbers on a slot Default Value None Usage Guidelines The command can be used to enter the interface range mode. Example The following example shows how to enter the port configuration mode of gigabit Ethernet port 1, 2, 3 or 4 on slot 0. switch_config# interface range gigaEthernet 0/1-4 switch_config_if_range# Note: There is no space at the neither side of the symbol “_” and the symbol “,”. 1